Networking: Difference between revisions

Networking (view source)

6 bytes added , 25 February

121

edits

@@ Line 10: / Line 10: @@
 You can create a network from the Create network button from both the <code> Network Topology</code> tab. Pick the name of the network with <code>Enable Admin State </code> and <code>Create Subnet box checked</code>, click next, pick a name for the subnet, in <code>Network Address Source</code> select <code>Allocate Network Address from a pool </code>, select the 172.16.0.0/12 pool and use the needed <code> Network Mask </code>, 24 will give you 256 addresses, click Next, make sure Enable DHCP is checked and click Create. You now have a new network. You can attach an existing VMs to that new network in the <code>Instance</code> tab by selecting <code> Attach Interface</code> in the <code>Actions</code> drop down menu of the instance.
-Not that VMs that will be solely attached to that network will have no internet access. You would need to attach the router that has access to the Public-Network to the network to make that happen.
+Not that VMs that will be solely attached to that network will have no internet access. You need to attach the router that has access to the Public-Network to the network to give it acess to the internet.
 === Share the network with another tenant ===
 This step can only be made with the [[OpenStack Client]], start by following its [[OpenStack_Client#Install_the_openstack_client|installation and configuration procedure]]